Fire Alarms & Smoke Detectors
Self-Adhesive Vinyl “No Smoking” Sign, 8″ x 10″
- Self-Adhesive VINYL SIGNS are silk screened with UV inks, then clear laminated for durability and fade resistance
- Mounting surface must be clean, dry, smooth and nonporous. To mount these on a porous surface, such as brick or concrete block, use our Sign On aerosol adhesive
- States: ”NO SMOKING”
- Size: 8" x 10"
- Material: Vinyl
Honeywell – System Sensor SPSCW-CLR-ALERT White Ceiling-Mount SpectrAlert Advance Strobe
Fire-Lite SD355 Addressable Photoelectric Smoke Detector
Technical Specifications:
- Operating Voltage Range: 15 to 32VDC
- Standby Current: 300 at 24VDC (one communication every five seconds with LED light enabled)
- Maximum Alarm Current (LED on): 6.5ma at 24VDC
- Operating Humidity Range: 10 percent to 93 percent relative humidity, non-condensing
- Operating Temperature Range: 32 F to 120 F (0 to 49 C)
- Height: 2.0" (51mm) installed in B350LP base
- Diameter: 6.2" (155mm) installed in B350LP base
- Weight: 5.2 oz (147g)
- Mounts to: Single-gang box 3.5" (8.89cm), 4.0" (10.16cm) octagonal box, 4.0" (10.16cm) square electrical box (using included plaster ring)
System Sensor P2RK 2-Wire Outdoor H/S Multi-Candella, Red
- Electrically compatible with existing SpectrAlert products
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Plug-in design
- Field selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185
- Same mounting plate for wall- and ceiling-mount units
- Shorting spring on mounting plate for continuity check before installation
- Tamper resistant construction
- Outdoor wall and ceiling products rated from –40°F to 151°F
- Design allows minimal intrusion into the back box
- Horn rated at 88+ dbA at 16 volts
- Rotary switch for horn tone and three volume selections
- Outdoor products UL listed to UL 1638 (strobe) and UL 464 (horn) outdoor requirements
- Outdoor products rainproof per UL 50 (NEMA 3R)
- Compatible with MDL sync module
